
The OP415 was designed to test 24-fiber MTP®/MPO cable assemblies efficiently, but it can easily be configured for 8-fiber and 12-fiber testing. It comes pre-loaded with 12-fiber and 24-fiber polarity types A, B, and C plus the ability to create and store custom fiber mappings and channel configurations. Alternatively, the OP415 can learn polarity types from existing cables and store those for future use.
Capabilities
- Test 24 fiber cables for polarity in 1.5 seconds
- Replaceable front panel cartridges for use with 16, 12, or 8 fiber MTP®/MPO configurations
- Test for polarity types A, B, C or custom configurations:
(1) Simple Pass/Fail of predefined polarity type
(2) or identify cable polarity type - Learns polarity types from existing cables and stores your custom polarity for instant retrieval
- Visual Fault Finder with 24 individual bright red 650nm lasers help with visual channel recognition and routing
- Especially useful with round non-color-coded fibers; simply terminate one end and use the VFL feature to identify channels for second connector termination
- Power level display provides valuable feedback on the quality of the termination per channel
- Built-in memory stores results for later analysis
- Full color touchscreen shows fiber mapping graphically for rapid production
Product Specs
OP415 | ||
Laser Sources, Red Visible Light | 24 | |
Optical Interface | Source: SM MTP APC male | Receive: MM MTP APC male |
Internal Fiber | Source: 9/125μm | Receive: 62.5/125μm |
Laser Wavelength | 650nm | |
Output Power (Typical) | 1.0 mW | |
Power Supply | +9VDC 5A | |
Data Interface | USB 2.0 | |
Dimensions | 8.5” x 3.5” x 10” | |
Test Time (24f) | < 1.5s |
Downloads
OP415 Polarity Analyzer Datasheet
OP415 Optical Shuffle Polarity Testing Sell Sheet – English Language
OP415 Optical Shuffle Polarity Testing Sell Sheet – Chinese Language
Watch Videos
OP415 Overview
Testing the Polarity of an 8×8 Shuffle System