Advancing the World of Fiber Optics™

OptoTest Fiber Optic Continuity Tester OP1100

The OP1100 Fiber Discontinuity Tester & Analyzer allow you to capture short optical power interruptions and dropouts every 0.8µs to 1 second. The included easy to operate OPL-Disc software logs all of the events into a spreadsheet for analysis. This product performs tests in accordance with EIA/TIA-FOTP-32A.

This test solution provides a method for testing a broad variety of passive or active fiber optic components for susceptibility to discontinuities (signal dropout, transient output or transmittance fluctuations) during application of an external stimulus, such as temperature, vibration or physical shock.

Request a Quote

Product Features

Single mode/Multimode capable
Input power range of -40dBm to -2dBm
Selectable dropout detection range of 0.8µs to 1s
Selectable loss threshold of 0.5dB to 3dB
Bundled OPL-DISC application that records data directly into a spreadsheet
USB Interface for seamless remote control
Support of most common connector options (FC, ST, SC, etc…)

Product Specs

OP1100
Optical Power Meter	Input power range: -2dBm to -40dBm Wavelength Range: 830nm to 1650nm
Optical Receiver	300µm InGaAs Detector >2MHz Bandwidth Linear amplifier output 0 to 2.5V
Discontinuity Detection	Event duration: >0.8µs to 1s Event amplitude: >= 0.5dB Sampling interval: 0.4µs Event trace: 1,000 samples
Data Interface	USB 1.1, USB 2.0 compatible data rate and interconnect
Operating Temperature Range	0ºC to 50ºC (32ºF to 122ºF)
Optical Interface	Fixed FC (others upon request)
Power Supply (order country specific)	US Standard or Euro Standard
Mechanical Dimensions	Standard 19” rack, 2U (16.8 x 3.8 x 10 inch)

Downloads

OP1100 Discontinuity Analyzer Sell Sheet
OP1100 Discontinuity Analyzer Datasheet