SMX-Manta+V2
Microscope

SMX-Manta+V2 is a portable microscope probe designed for inspection of all types of single and multi-fiber optical connectors, patch cords and bulkhead, included but not limited to: MT, MPO, LC, FC, SC, E2000™, PRIZM, QSFP, ARINC, MIL Spec termini, ODC12, High-power SMA, Avim, mini-Avim and more.

The probe can be used for visual inspection of the connector end-face for scratches, defects and contamination and for automatic Pass/ Fail testing. The probe features a large field of view enabling to test multi-fiber connectors in just two scans taking less than 2 seconds.

High resolution of SMX-Manta+V2 and its portable design allow for using the probe in a lab and in the field.
SMX-Manta+V2 is an upgraded model of SMX-Manta+ with improved reliability and usability.

Manta-W+

FEATURES & BENEFITS

—

Automatic inspection mode

Fast testing procedure saves you time and increases productivity.

Pass/Fail criteria

The software is provided with predefined Acceptance Criteria as standardized by the International Electrotechnical Commission (IEC) for single mode and multi-mode connectors or you can utilize YOUR own Pass/Fail criteria for your specific needs/applications.

Detailed analysis of defects

Want to know types, dimensions and other parameters of detected defects? Explore details with MaxInspect™ software. Store and print your testing results. Mine your data.

Large field of view (2.4 x 1.8 mm)

Test MTP®/MPO connectors with up to 72 fibers in just two scans, inspect entire ferrule surface including guide holes if needed. Check the whole SMA connector endface in one shot.